Pioneer pdp-505hd Operating Guide

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

<ARE1349> En

CABLE and SAT cannot be selected at the same time.

When SAT is preset by “Remote code set up”, the
remote control unit buttons will function as shown below.
÷ When a satellite broadcast tuner is connected to this

unit, press the input selector button that has the same
number as the connected input terminal and set the
mode switch to CBL/SAT. The tuner can be operated
using buttons 1 to 8.

÷ Satellite broadcast tuners which are made by other

makers and are not preset can also be operated with
the remote control unit if buttons 1 to 8 have learnt
the functions (page 41).

1

Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.

2

CH (Channel) +, – buttons
Press plus (+) or minus (–) to tune in a higher or lower
channel.

3

SOURCE POWER button
Turns the power of the SAT (digital satellite system
tuner) on and off.

4

2, 3, 5, ∞)

2, 3, 5, ∞: Press the button to select items on the
SAT GUIDE screen or SAT menu screen.
SET/SELECT: Press to activate the selected function.

5

CH ENTER button
Fix the selected channel with the direct channel
selection buttons.
÷ This button is not preset. Use this button to learn if

necessary.

6

SAT MENU button
When this button is pressed, the satellite broadcasting
menu will be displayed.

7

SAT GUIDE button
When this button is pressed, the satellite broadcasting
guide screen will be displayed.

8

(SAT) INFO button*
When this button is pressed, information on satellite
broadcasting will be displayed.

* (SAT) INFO button has no remote control signals preset. Learn

the operation if necessary.

¶

Î

1

2

3

4

5

6

7

8

9

¶

0

%

%

%

%

1

7

3

¡

8

4

¢

1

3

2

5

4

6
7

8