ConnectGear gr-104 User Guide
45
DoS Protection
Protections from any Denial of Service Attacks
Discard Ping From WAN
The router’s WAN port will not respond to any
Ping requests
Ping requests
RIP defect
Protection from RIP defect
When hackers attempt to enter your network, we can alert you by e-mail
Email Address
En
ter the email address that you would like the
alert warning to be sent to should an attack
occur
occur
SMTP Server Address
Enter the IP address of the above email
address’ SMTP server
address’ SMTP server
POP3 Server Address
Enter the IP address of the above email
address’ POP3 server
address’ POP3 server
User Name
Enter the User Name of the above POP3 server
Password
Enter the Password of the above POP3 server
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
configure other advance sections or start using the router (with the advance settings in place)
2.5.3 DMZ
If you have a local client PC that cannot run an Internet application (e.g. Games) properly from
behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access
by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN
port IP address to a particular IP address in your LAN. The difference between the virtual server
and the DMZ function is that the virtual server re-directs a particular service/Internet application
behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access
by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN
port IP address to a particular IP address in your LAN. The difference between the virtual server
and the DMZ function is that the virtual server re-directs a particular service/Internet application