ConnectGear gs-1124 User Guide

User Manual    

 

The possible causes for a no link LED status are as follows: 

z

 

The attached device is not powered on 

z

 

The cable may not be the correct type or is faulty 

z

 

The installed building premise cable is faulty 

z

 

The port may be faulty 

 
5-2. Q&A 

1. Computer A can connect to Computer B, but cannot connect to Computer C     

through the 24 Gigabit Web Smart Switch. 

9

 

The network device of Computer C may fail to work. Please check the 
link/act status of Computer C on the LED indicator. Try another network 
device on this connection. 

9

 

The network configuration of Computer C may be something wrong. Please 
verify the network configuration on Computer C. 

 

2. The uplink connection function fails to work. 

9

 

The connection ports on another must be connection ports. Please check if 
connection ports are used on that 24 Gigabit Web Smart Switch. 

9

 

Please check the uplink setup of the 24 Gigabit Web Smart Switch to verify 
the uplink function is enabled. 

 

3. The console interface cannot appear on the console port connection. 

9

  24 Gigabit Web Smart Switch has no console port, so you cannot use 

console interface to connect with 24 Gigabit Web Smart Switch. 

           
4. How to configure the 24 Gigabit Web Smart Switch. 
 

9

 

User can use IE browser program in window series of computer to control 
the web smart functions in 24 Gigabit Web Smart Switch. First, choose any 
port in 24 Gigabit Web Smart Switch. Then, use IE and type default IP 
address, 192.168.1.1, to connect to 24 Gigabit with RJ45 network line. 
Finally, the login screen will appear at once.