ConnectGear gs-1124 User Guide

 

 

 
This chapter instructs you how to configure and manage the 24 Gigabit Web 

Smart Switch through the web user interface it supports, to access and manage 22 
10/100/1000Mbps TP Port and 2 Gigabit TP/SFP Fiber dual media port. The switch 
provides 22 fixed Gigabit Ethernet TP ports and two optional Gigabit dual media 
ports supporting either fiber or TP media. With this facility, you can easily access 
and monitor through any one port of the switch all the status of the switch, including 
MIBs status, each port activity, multicast traffic, and so on.  
 

The default values of 24 Gigabit Web Smart Switch are listed in the table 

below: 

 

  192.168.1.1 

  255.255.255.0 

  192.168.1.254 

  admin 

                                            

Table 4-1 

After the 24 Gigabit Web Smart Switch has been finished configuration, you 

can browse it by using the IP address you set up. For instance, type 
http://192.168.1.1 in the address row in a browser, it will show the following screen 
(see Fig.4-1) and ask you inputting password in order to login and access 
authentication. The default password is “admin”. For the first time to use, please 
enter the default password, then click the <Apply> button. The login process now is 
completed. 

In the switch, it supports a simple user management function allowing only 

one administrator to configure the system at the same time.  

To optimize the display effect, we recommend you use Microsoft IE and have 

the resolution 1024x768. 

Here is the whole function tree with web user interface and we will travel it 

through this chapter.