Manualsbrain.com
  1. Manuals
  2. Brands
  3. ConnectGear
  4. gs-1124
  5. User Guide

ConnectGear gs-1124 User Guide

Download
Page of 111
User Manual    
Publication date: January, 2005  
Revision A1 
54 
 
4-2-2. Ports Configuration 
 
Function name: 
Ports Configuration 
Function description: 
Ports Configuration is applied to change the setting of each port. In this 
configuration function, you can set/reset the following parameters, Mode and 
Flow Control. All of them are described in detail below. 
Parameter description:
 
Mode:  
Set the speed and duplex of the port. If the media is 1Gbps fiber, there 
are three modes to choose: Auto Speed, 1000 Full and Disable. If the 
media is TP, the Speed/Duplex is comprised of the combination of speed 
mode, 10/100/1000Mbps, and duplex mode, full duplex and half duplex. 
The following table summarized the function the media supports. 
Media type 
NWay 
Speed 
Duplex 
1000M TP 
ON/OFF 
10/100/1000M 
Full for all, Half for 10/100 
1000M Fiber 
ON/OFF 
1000M 
Full 
In Auto Speed mode, no default value. In Forced mode, default value 
depends on your setting. 
Flow Control:  
There are two modes to choose in flow control, including Enable and 
Disable. If flow control is set Enable, both parties can send PAUSE frame 
to the transmitting device(s) if the receiving port is too busy to handle.  
When it is set Disable, there will be no flow control in the port. It drops 
the packet if too much to handle.  Default: Enable 
  
Fig. 4-4