ConnectGear gs-1124 User Guide

User Manual    

 

Bandwidth Management 

Function description: 

Bandwidth Management function is used to set up the limit of Ingress and 
Egress bandwidth for each port.  
 

 

Fig. 4-19 

Port Number: 

Choose the port that you would like this function to work on it. Valid 
range of the port is 1~24.  If you would like to set up all ports at a time, 
user is also allowed to choose “All” in the selection list to simplify the 
procedure of configuration. 

All Traffic for Ingress Rate Limiting: 

Set up the limit of Ingress bandwidth for the port you choose.  Incoming 
traffic will be discarded if the rate exceeds the value you set up in Data 
Rate field. Pause frames are also generated if flow control is enabled. 
The limited format of the packet includes unicast, broadcast and 
multicast. Valid range is 0~1000. 

Broadcast & Multicasat for Ingress Rate Limiting: 

Set up the limit of Ingress bandwidth for the port you choose.  Incoming 
traffic will be discarded if the rate exceeds the value you set up in Data 
Rate field. The limited format of the packet only includes broadcast and 
multicast. Valid range is 0~1000.