ConnectGear me-21tr Specification Guide
APPLICATION :
FEATURE :
PACKAGE CONTENTS :
ME21T x 1 piece
ME21R x 1 piece
1.8M Cable x 1 set
Power Adapter : AC 9V-12V / 1A min.
ME21R x 1 piece
1.8M Cable x 1 set
Power Adapter : AC 9V-12V / 1A min.
Category 5 Ethernet Cable to Connect
the Transmitter and Receiver Units.
Auto Signal Compensation.
Dual Console Operation-Control Your
System from the PS/2 Keyboard, the
PS/2 Mouse, and the Monitor Console
of either the transmitter or the receiver.
Auto Resolution of the Active Console.
High Resolution Video-Up To 1280x1024.
Supports VGA, SVGA, and Multisync
Monitors.
Local Monitor Supports DDC; DDC2;
DDC2B.
the Transmitter and Receiver Units.
Auto Signal Compensation.
Dual Console Operation-Control Your
System from the PS/2 Keyboard, the
PS/2 Mouse, and the Monitor Console
of either the transmitter or the receiver.
Auto Resolution of the Active Console.
High Resolution Video-Up To 1280x1024.
Supports VGA, SVGA, and Multisync
Monitors.
Local Monitor Supports DDC; DDC2;
DDC2B.
1
2
5
6
7
3
4
CONSOLE
PC
REMOTE
RESET
POWER
UTP/STP
UTP/STP
RESET
CONSOLE
CONSOLE
PC
or
KVM Switch
CONSOLE
POWER
EXTENDER
CONSOLE
KVM
TRANSMITTER
PC
KVM
EXTENDER
RECEIVER
UTP/STP
RESET
POWER
REMOTE
RESET
POWER
UTP/STP
CONSOLE
FRONT
REAR
ME21T
ME21R
SPECIFICATION :
FRONT SIDE & REAR SIDE :
Max. Resolution
Video Bandwidth
Horizontal Frequency
Vertical Frequency
Receiver side
Transmission Distance
Power
1600 x 1200
200 MHz
1280 x 1024
150 MHz
30-100 KHz
43-120 Hz
8P8C x 1
ME21T to ME21R : 10~150 meters
AC 9V-12V / 1A min.
Description
&
Transmitter
Side
Input
Output
ME21T
ME21R
HD15M x 1
MD6F x 2
Power LED x 1
Cat.5 x 1
HD15F x 1
MD6F x 2
HD15F x 1
MD6F x 2
FUNCTION :
This product is a KVM extender. It includes one transmitter,
ME-21T, and one receiver, ME-21R. There has a PC side and
Console side on ME-21T and a Console and REMOTE side on
ME-21R.
Console side on ME-21T : A VGA connector and 2 PS2
connectors for mouse and keyboard.
PC side on ME-21T : A VGA connector and 2 PS2 connectors
for mouse and keyboard.
Console side on ME-21R : A VGA connector and 2 PS2
connectors for mouse and keyboard.
There is an UTP/STP Socket on each ME-21T & ME-21R.
This Socket is used for connecting ME-21T & ME-21R by
Category 5 cable with 8P8C connector.
Any PS2 interface on ME-21T & ME-21R supports Hot-Plugging
function.
2D、3D、5Key mice are supported. Using different mice on
ME-21T & ME-21R are implemental.
LINK LED light : To show the connection status.
HOT KEY : To adjust the Buzzer、Screen Display only.
The Screen display on all monitors are synchronous by default,
unless selected.
The VGA gain on ME-21R is adjustable and it can be adjusted by
Hot-Key operation.
ME-21T, and one receiver, ME-21R. There has a PC side and
Console side on ME-21T and a Console and REMOTE side on
ME-21R.
Console side on ME-21T : A VGA connector and 2 PS2
connectors for mouse and keyboard.
PC side on ME-21T : A VGA connector and 2 PS2 connectors
for mouse and keyboard.
Console side on ME-21R : A VGA connector and 2 PS2
connectors for mouse and keyboard.
There is an UTP/STP Socket on each ME-21T & ME-21R.
This Socket is used for connecting ME-21T & ME-21R by
Category 5 cable with 8P8C connector.
Any PS2 interface on ME-21T & ME-21R supports Hot-Plugging
function.
2D、3D、5Key mice are supported. Using different mice on
ME-21T & ME-21R are implemental.
LINK LED light : To show the connection status.
HOT KEY : To adjust the Buzzer、Screen Display only.
The Screen display on all monitors are synchronous by default,
unless selected.
The VGA gain on ME-21R is adjustable and it can be adjusted by
Hot-Key operation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
9.
10.
1.GET CONTROL RIGHT:
The user authorization will be released automatically, after 2
minutes stop. You can press any key of the keyboard on the
local or remote side to get the control authorization. First
comes first served.
2. SETTING THE BUZZER ON OR OFF:
Hit <R> <SHIFT> twice in 3 seconds. If there is a beep sound,
it means the BUZZER is ON.
3.INTO HOT-KEY MODE:
The user authorization will be released automatically, after 2
minutes stop. You can press any key of the keyboard on the
local or remote side to get the control authorization. First
comes first served.
2. SETTING THE BUZZER ON OR OFF:
Hit <R> <SHIFT> twice in 3 seconds. If there is a beep sound,
it means the BUZZER is ON.
3.INTO HOT-KEY MODE:
OPERATION :
LINK LED :
There is a LINK LED on both of ME-21T and ME-
21R. The LINK LED on both sides shows the
connecting status simultaneously.
21R. The LINK LED on both sides shows the
connecting status simultaneously.
1.
When the LINK LED is off, it means the connection
between ME-21T and ME-21R is failed.It also means
the receiving side (ME-21R) is disconnected.
When the LINK LED flashes fast, it is in AUTO
mode. Under the AUTO mode, use any keyboard and
mouse on either side to get the control of PC.
When LINK LED lights steadily, it means the PC is
used by the receiving side (ME-21R).
When the LINK LED flashes slowly, it means the
PC is used by the transimitting side (ME-21T).
At this time, the 3 LED indicators on the keyboard
of the receiving side (ME-21R) are flashing.
When the LINK LED is on, it means the receiving
side (ME-21R) is connected.
When the receiving side (ME-21R) is turned on, the
LINK LED on the ME-21T shows off and 3 LED
indicators on the keyboard of receiving side
(ME-21R) are flashing.
This status indicates improper connection.
between ME-21T and ME-21R is failed.It also means
the receiving side (ME-21R) is disconnected.
When the LINK LED flashes fast, it is in AUTO
mode. Under the AUTO mode, use any keyboard and
mouse on either side to get the control of PC.
When LINK LED lights steadily, it means the PC is
used by the receiving side (ME-21R).
When the LINK LED flashes slowly, it means the
PC is used by the transimitting side (ME-21T).
At this time, the 3 LED indicators on the keyboard
of the receiving side (ME-21R) are flashing.
When the LINK LED is on, it means the receiving
side (ME-21R) is connected.
When the receiving side (ME-21R) is turned on, the
LINK LED on the ME-21T shows off and 3 LED
indicators on the keyboard of receiving side
(ME-21R) are flashing.
This status indicates improper connection.
2.
3.
4.
5.
6.
7.
MPM116
Cat.5 x 1
Power LED x 1
UTP/STP Cable
max : 150m
max : 150m
KVM Switch
Hit <Alt> twice in 3 seconds to enter the Hot-key mode.
INDEPENDENT MONITOR DISPLAY:
(FOR ME-21T ONLY)
Under the Hot-key mode, hit <L> key to turn off the
monitor on the remote side(ME-21R). Out of the Hot- Key
mode, it turns back to the original setting mode.Under the
hot-key mode, hit the (L) key again, the monitor on the
remote side (ME-21R) will be "on".
VGA ADJUSTING CONTROL: (FOR ME-21R
ONLY)There are 8 levels for adjusting images. The
original setting is on the level 4, Under the Hot-key mode,
hit <Page Down> or <Page up> to change level.
EXIT Hot-Key mode:
Under the Hot-key mode, hit <Esc> to exit.
INDEPENDENT MONITOR DISPLAY:
(FOR ME-21T ONLY)
Under the Hot-key mode, hit <L> key to turn off the
monitor on the remote side(ME-21R). Out of the Hot- Key
mode, it turns back to the original setting mode.Under the
hot-key mode, hit the (L) key again, the monitor on the
remote side (ME-21R) will be "on".
VGA ADJUSTING CONTROL: (FOR ME-21R
ONLY)There are 8 levels for adjusting images. The
original setting is on the level 4, Under the Hot-key mode,
hit <Page Down> or <Page up> to change level.
EXIT Hot-Key mode:
Under the Hot-key mode, hit <Esc> to exit.
A.
B.
B.
C.
D.