Coby cx-cd239 Operating Guide

1. TO PROGRAM

Press PROG button at stop mode and "Pr" will display.

(a)

Press FF      (or REW     ) button to select the track number.

(b)

When desired track is displayed, press PROG. button to set.

(c)

Repeat (b)~(c) to set up to 16 tracks. The display will show the
current set track.

(d)

Set tracks can be checked by pressing PROG. button.

(e)

2. TO COMPLETE THE PROGRAMMING AND TO PLAY

Press PLAY/PAUSE(      ) button to start the
programmed tracks.

COBY ELECTRONICS CORP.(”COBY”) warrants this product to the
original purchaser to be free from defects in material or workmanship
under normal use for 90 DAYS from the date of original purchase.
COBY agrees under this warranty, torepair or replace it with a new or
reconditioned product at no additional charge. Our warranty does not
cover any product which has been subject to neglect, unreasonable
use, accident, violation of operating instruction or any product that has
been repaired or modified by an unauthorized service agent. To obtain
factory service, return this unit freight-prepaid to the address shown
below within the duration of this warranty. Enclose $6.00 for each item
in the form of money order made payable to COBY ELECTRONICS
CORP. to cover the cost of shipping and handing.  Also, include a copy
of the sales receipt to show proof of purchase and a detailed description
of the problem. The unit(s) must be packaged in such a way as to rea-
sonably protect it frompossible shipping damage.  For further information
write to.

COBY’S liability under any legal theory for any loss damage in any way
related to this product shall not exceed the sales price of this product.
In no event shall COBY be liable for any incidental or consequential
damages resulting from the use of this product, or inability to use this
product. Repair or replacement as provided under this warranty is the
exclusive right of the consumer.

Except to the extent prohibited by law, no express or implied warranty
of merchant ability or fitness for a particular purpose on this product
shall be extended beyond the period of this warranty. Some States
prohibit the exclusion or limitation of incidental or consequential
damages, so that the above limitation or exclusion may not apply
to you. This warranty gives you specific rights, and you may also
have other rights which may vary from State to State.

Volume to low listening level and press DBBS switch in
the direction of the arrow to turn this function ON.

Note: Some CD’s with DBBS may exceed the bass
response capacity and can cause distortion. Do not play
DBBS in high volume. Playing DBBS in high volume may
cause damage to the headphone and more importantly to
your hearing.

The Dynamic Bass Boost System(DBBS) enhances the
low frequency(Bass) response of the output. Set the

Press FF       (or REW      ) button to set the desired
track#, press PLAY/PAUSE  (      )button to play. Press
FF     (or REW     ) button to change the track# during
the play mode.

During play, press REW      button to play previous track.

During play, press and hold FF      (or REW      ) button
continuously to fast forward (or fast reverse) the current
track.

During pause mode, press FF      (or REW      ) button to
play the next track (or previous track).

Set the FUNCTION Selector to the CD position and insert a CD.

1. Press PLAY/PAUSE button to play.

2. Press PLAY/PAUSE button to pause while in play mode.

3. Press PLAY/PAUSE button once more to resume play.

4. Press STOP to stop play.

5. Always press STOP and wait for complete stop to remove CD

   from CD player.

1. Slide the Function Selector switch to AM or FM band.

2. Tune the desired station by turning the Tuning Control.

3. Adjust the volume with Volume Control as desired.

4. Extend Telescopic Antenna and adjust the direction and angle

    to obtain the optimum reception.

5. Set the Function Switch to OFF for power standby mode.

You can use headphones with 3.5mm diameter stereo plug and

have impedance of 32ohms. When the headphones are con-

nected, the speakers are disconnected automatically.

Set the VOLUME to a low level before using headphones and

gradually adjust the Volume Control to the comfortable listening

level.

Do not play the VOLUME too loud for extended periods of time

to avoid any damage your hearing.

1. Press MODE button once to repeat current track. repeat light

    will flash.

2. Press MODE buton twice to repeat all tracks.

3. Press MODE buton again to cancel repeat track.repeat light

    will dim.

1.

2.

3.

1.

Power Source

Speakers

Output Power

Dimensions

Weight

: AC 110V 60Hz 10W DC 9V

  (6x"C" size batteries)(not included)

: 8 ohm

: 2x0.8 W

: 10 1/4"x10 1/4"x5 1/8"

: 4.4 lbs (without batteries)

Radio

Frequency Response

:  FM  88-108MHz

                   

   AM 530-1700KHz

Laser Wavelength      : 760-800NM
Tracking Method       : 3-spot error detection/3.86mm lens

CD Player