Piper Products sbh-2-hh Brochure
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
SPEC
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
F-13
TQM1-L
R
R
TQM2-L
R
R
TQM1-N
R
R
TQM2-N
R
R
TQM3-N
R
R
Enclosed Tray Transport Carts
Series TQM-L (Low Profile) & TQM-N (Narrow Profile)
These tray transport carts are designed for heavy duty
usage. They include a number of features as standard
so as to ensure durability and convenient operation.
The “L” profile carts accept two trays per level to permit
minimizing overall height; whereas the “N” profile carts
accept only one tray per level to minimize overall depth.
CABINET & BASE
The cabinet is fabricated of heavy guage stainless steel,
reinforced with box and channel shapes for extra strength.
An all welded stainless steel base frame provides firm
support for the cabinet as well as for the casters and
assures rigidity for the entire assembly. The rear of the
cabinet is vented. The base and top cover extend beyond
the cabinet as extra protection. The base is fitted with a
full perimeter wrap-around bumper. Interior compartment
bottom is easily cleanable with no protrusions or
obstructions. Vertical, recessed pull handles are mounted
on both ends. A menu-card clip is mounted at one end.
DOORS
Each bank is fitted with a full length, double pan insulated
door. Doors are insulated with one inch thick polystyrene
sheet. The doors swing 270° (except the center door on three
bank carts, which swings 180°). All doors are equipped with
heavy-duty hinges, recessed stainless steel handle, bottom-
mounted door catch and a hold-open device.
TRAY SLIDES
Each compartment is fitted with stainless steel tray slides
welded to stainless steel standards, forming removable ladder
assemblies, which are securely mounted to minimize noise
and vibration. The tray slides have rounded corners and are
mounted 4 ¾” on center.
CASTERS
One bank carts are mounted on standard, four 6” diameter,
heavy duty, double ball bearing casters with non-marking
tires. Two casters are swivel and are equipped with brakes.
Two casters are rigid. Two and three bank carts have six 6”
casters, four swivel (two with brakes) and two rigid (mounted
at center).
TQM3-N24-1622
177