Avaya 10bs User Guide
Line Button Lights
-
Light
Meaning
Steady red (not for MLC-5)
The line you are using or will use when you lift the handset or press
the Spkrphone button.
the Spkrphone button.
Steady green (red on MLC-5)
The line is in use, or the feature programmed onto the line button is on.
Flashing green
An incoming call is ringing on this line button or a call you trans-
ferred is returning to this line button (see p. 6).
ferred is returning to this line button (see p. 6).
Fast-flashing green
You have put a call on hold on this line button.
(red on MLC-5)
Slow-flashing green
Someone else has put a call on hold on this line button.
(red on MLC-5)
Line Buttons
-
Tones
-
Tone
Meaning
Dial tone (steady)
You can make a call.
Busy (slow repeating tone)
The phone you are calling is busy.
Fast busy (fast repeating tone)
No lines are available.
Error (alternating high-low tones) You dialed a number or used a feature incorrectly.
Confirmation (double break in
You used a feature correctly.
dial tone followed by steady tone)
Callback (5 short beeps)
Call Waiting (1 or 2 beeps)
You have an inside (1 beep) or an outside (2 beeps)
call waiting (see p. 13).
call waiting (see p. 13).
Rings
-
The table below helps you identify the different types of ringing. You can also personalize ringing at your
telephone or adjust ring timing for the line buttons where calls arrive. Programming Buttons &
Settings, p. 20, tells you how to change the settings. Listed below are your options:
telephone or adjust ring timing for the line buttons where calls arrive. Programming Buttons &
Settings, p. 20, tells you how to change the settings. Listed below are your options:
• Personalized Ring*. Allows you to give calls ringing at your phone one of 8 distinctive rings.
• Abbreviated Ring. When you are on a call and another call arrives at your phone, you can use
• Abbreviated Ring. When you are on a call and another call arrives at your phone, you can use
this feature to give the second call a short ring.
• Immediate Ring. Calls ring immediately on line buttons set this way.
• Delay Ring. This setting causes calls to ring at your phone after a delay. If your calls are being
• Delay Ring. This setting causes calls to ring at your phone after a delay. If your calls are being
covered, this allows time for another person to answer a call before you do.
• No Ring. Calls do not ring (except for returning transferred and Callback calls). Calls on lines set
• Send Ring. Usually, when a call comes in on an SA button, it rings there immediately and rings
at corresponding SSA buttons after a delay, giving the person with the SA button time to answer
before the call is picked up by someone with a corresponding SSA button. When busy on another
call, the person with the SA button can use the Send Ring setting to make calls arriving at other
SA buttons ring
before the call is picked up by someone with a corresponding SSA button. When busy on another
call, the person with the SA button can use the Send Ring setting to make calls arriving at other
SA buttons ring
immediately on corresponding SSA buttons instead of after a delay.
*
On MLC-5, must be programmed by system manager.
Ring
Meaning
1 long ring
Inside call
1 short ring and 1 long ring
Outside call
2 short rings and 1 long ring
Outside call transferred, returning transferred call, or
returning Callback call (see p. 13)
returning Callback call (see p. 13)
Understanding Your Telephone
All Telephones
NNN-XXXX Make/receive outside calls only.
Telephones with ICOM Buttons
ICOM Ring Make/receive inside ringing calls
and receive inside voice-
announced calls.
announced calls.
ICOM Voice Make inside voice-announced calls
and receive inside ringing and
voice-announced calls.
voice-announced calls.
ICOM
Make (not receive) inside calls only.
Originate
Only
Only
Telephones with System Access (SA) Buttons
SA buttons give you access to inside or outside lines
for making and/or receiving calls. To make an
outside call on an SA button, first dial the dial-out
code (usually 9) that your system manager supplies.
No dial-out code is necessary when you call another
extension.
for making and/or receiving calls. To make an
outside call on an SA button, first dial the dial-out
code (usually 9) that your system manager supplies.
No dial-out code is necessary when you call another
extension.
SA Ring
Make/receive inside/outside ringing
calls and receive inside
voice-announced calls.
calls and receive inside
voice-announced calls.
SA Voice
Make/receive outside calls; receive
inside ringing and voice-announced
calls; make inside voice-announced
calls.
inside ringing and voice-announced
calls; make inside voice-announced
calls.
SA Originate Make (not receive) inside and
Only
Only
outside calls.
Shared SA
Make/answer calls for co-workers or
SSA
join conversations. Line is shared
with another co-worker(s). One
person has an SA button that is
shared with one or more others who
have SSA buttons corresponding to
it. See Rings for information about
how calls ring at these buttons.
with another co-worker(s). One
person has an SA button that is
shared with one or more others who
have SSA buttons corresponding to
it. See Rings for information about
how calls ring at these buttons.
Pool
Make/receive outside calls only. Use
the dial-out code supplied by your
system manager.
the dial-out code supplied by your
system manager.
Note:
MLC-5 cordless telephones can make but not
receive voice-announced calls.
MLC-5 cordless telephones can make but not
receive voice-announced calls.
2
!
CAUTION:
To clean your phone, unplug it from the wall jack and use a
slightly dampened cloth. To prevent
permanent damage, do not immerse the phone in water or any liquid, and do not use liquid or aerosol
cleaners directly on the telephone.
cleaners directly on the telephone.
Anal Multi pg 2 foldout
4/11/97, 9:32 AM
2