Epson DFX-9000 User Manual

Your printer can load paper from a front tractor and a rear tractor. Be sure to 
leave enough room around the printer for the two stacks of fresh paper and for 
the printed stack. Align your paper supply so the paper feeds smoothly into the 
printer.

Place the paper supply lower than the printer to avoid a paper jam. Make sure 
that your stack of printed pages does not interfere with the rear tractor’s paper 
supply.

You can use the following types of continuous paper with either tractor:

❏

Single-sheet

❏

Multi-part

❏

Labels

❏

Continuous forms with labels

❏

Overlapping multi-part forms

You can print on continuous paper from 3 inches (76.2 mm) to 16.5 inches 
(419.1 mm) wide. Your printer senses the paper width automatically. 

The printer automatically adjusts to the thickness of the paper loaded when the 
platen gap setting is set to 

Auto

 in SelecType mode. See “Using SelecType 

❏

Make sure your paper matches the specifications described in the on-screen 
Reference Guide. 

❏

1.

Lift up the front cover until it locks in place.

2.

Release the right and left sprockets by pulling the lock levers down.

front tractor

both tractors

rear tractor

sprocket lock lever