Epson DFX-9000 Reference Guide
116
Problem Solving
Option problems
Software settings override
settings you make using the
default-setting mode or the
control panel buttons.
settings you make using the
default-setting mode or the
control panel buttons.
Use your application software to select
the font.
the font.
Vertical printed lines are not aligned.
Cause
What to do
Bidirectional printing, which
is the printer’s standard
printing mode, is out of
alignment.
is the printer’s standard
printing mode, is out of
alignment.
Use the printer’s bidirectional
adjustment mode to correct this
problem. See “Aligning Vertical Lines in
Your Printout” on page 123.
adjustment mode to correct this
problem. See “Aligning Vertical Lines in
Your Printout” on page 123.
The perforation cutter is installed and the printer does not feed
continuous paper properly.
continuous paper properly.
Cause
What to do
The perforation cutter’s
connector is not plugged
securely into the printer.
connector is not plugged
securely into the printer.
Turn off the printer, then check the
perforation cutter connector.
perforation cutter connector.