Epson DFX-9000 Reference Guide
Problem Solving
123
5
5
5
5
5
5
5
5
5
5
5
Clearing Paper Jams
Follow these steps to clear a paper jam:
1. Turn off the printer.
2. Open the front cover or back cover (depending on the tractor
you are using).
3. Tear off the fresh supply at the perforation.
4. Gently pull the paper out of the printer. Remove any
remaining pieces of paper.
5. Close the printer cover and turn on the printer. Make sure
the Paper Out light is not flashing and the Pause light is off.
Aligning Vertical Lines in Your Printout
If you notice that the vertical lines in your printout are not
properly aligned, you can use the printer’s bidirectional
adjustment mode to correct this problem.
properly aligned, you can use the printer’s bidirectional
adjustment mode to correct this problem.
During bidirectional adjustment, the printer prints three sheets
of alignment patterns, labeled High Speed Draft, Draft, and
NLQ (near letter quality). As described below, you select the
best alignment pattern from each sheet.
of alignment patterns, labeled High Speed Draft, Draft, and
NLQ (near letter quality). As described below, you select the
best alignment pattern from each sheet.
Note:
The setting instructions are printed in the language you chose in
SelecType mode. If you want a different language, see “Changing the
settings in SelecType mode” on page 94 for instructions.
The setting instructions are printed in the language you chose in
SelecType mode. If you want a different language, see “Changing the
settings in SelecType mode” on page 94 for instructions.