Epson DFX-9000 Reference Guide
152
Options and Consumables
Switching tractors
To switch tractors when the perforation cutter is installed,
follow these steps:
follow these steps:
1. Make sure the printer is turned on. If you are in the middle
of printing a document, wait for the printer to finish printing
before you switch tractors.
before you switch tractors.
2. If no paper is loaded in the tractor you want to use, load
paper. See “Loading Paper Onto the Front Tractor” on
page 15 or “Loading Paper Onto the Rear Tractor” on
page 22 for instructions.
page 15 or “Loading Paper Onto the Rear Tractor” on
page 22 for instructions.
3. Press the Front/Rear button to switch to the other tractor.
The printer cuts off the printed document, feeds the paper
on the tractor backward to the standby position, and then
advances the paper on the other tractor to the loading
position.
on the tractor backward to the standby position, and then
advances the paper on the other tractor to the loading
position.
Removing the perforation cutter
To remove the perforation cutter, follow the steps below. Then
store it in its original box and packing materials.
store it in its original box and packing materials.
1. Cut off any printed document in the printer as described in
the previous section.
2. Turn off the printer and open the paper separator cover.