Epson DFX-9000 Reference Guide
156
Options and Consumables
Note:
Your printer has an auto interface mode function that allows you to
connect to more than one interface at a time. See “Changing the
settings in SelecType mode” on page 94 for details.
Your printer has an auto interface mode function that allows you to
connect to more than one interface at a time. See “Changing the
settings in SelecType mode” on page 94 for details.
Coax and twinax interfaces enable the printer to communicate
with an IBM minicomputer or mainframe via coax or twinax
protocol. This allows Epson printers to function as local IBM
printers without the addition of any other circuitry or
components.
with an IBM minicomputer or mainframe via coax or twinax
protocol. This allows Epson printers to function as local IBM
printers without the addition of any other circuitry or
components.
Installing an interface card
Follow the steps below to install an optional interface card.
Note:
If you install an optional interface card, be sure to select the interface
you use in SelecType mode. See “Changing the settings in SelecType
mode” on page 94 for details.
If you install an optional interface card, be sure to select the interface
you use in SelecType mode. See “Changing the settings in SelecType
mode” on page 94 for details.
1. Turn off both your printer and your computer. Then remove
all power and interface cables from the printer.
2. Open the interface cover on the back of the printer.
3. Be sure to set any switches and jumpers on the card, as
necessary. (See the interface card’s manual for details.)
interface cover