Epson DFX-9000 Reference Guide

2

2

2

2

2

2

2

2

2

2

2

After you finish printing, you can use the tear-off feature to 
advance continuous paper on the push tractor to the tear-off 
edge of the printer. You can then easily tear off printed sheets. 
When you resume printing, the printer automatically feeds 
paper back to the loading position.

This feature lets you save paper that would normally be lost 
between documents.

If the perforation between pages is not aligned with the tear-off 
edge, you can adjust the tear-off position using the micro-feed 
feature. The printer remembers this new tear-off position.

c

Whether or not the printer is in tear-off mode, you can use the 
Tear Off button to advance continuous paper to the tear-off 
position by following these steps:

1. Make sure printing has finished. Then press the Tear Off 

button. The printer advances the paper to the tear-off edge 
and the Tear Off light comes on.

2. Tear off all printed pages. If the perforation is not aligned 

with the tear-off edge, adjust the tear-off position. See 
“Adjusting the tear-off position” on page 34 for instructions.

3. When you resume printing, the printer feeds the paper back 

to the loading position and begins printing. (You can also 
manually feed the paper back to the loading position by 
pressing the Tear Off button again.)