Epson DFX-9000 Reference Guide

6. Press the Tear Off button to feed the paper back to the 

top-of-form position. You are now ready to print your next 
document.

c

You can easily switch between paper loaded on the front tractor 
and paper loaded on the rear tractor. The instructions below 
explain how to switch from the front tractor to the rear tractor, 
but you can follow the same steps to switch from the rear tractor 
to the front tractor. 

c

Caution:
Never switch between tractors if labels are already loaded in the 
printer. First remove the labels by tearing off the fresh supply 
below the tractor and pressing LF/FF Load to eject the 
remaining labels. 

Before you start, make sure the printer is turned on and that the 
front tractor is selected (the front tractor arrow on the 
Tractor Select light should be on). If you are in the middle of 
printing a document, wait for the printer to finish printing 
before you switch tractors. Then follow these steps:

1. If no paper is loaded in the rear tractor, load paper to the 

standby position (the first five pins of the sprockets). See 
“Loading Paper Onto the Rear Tractor” on page 22 for 
instructions.