Epson DFX-9000 Reference Guide

In Default-setting mode, you can adjust the print position for 
continuous forms with labels and choose which control panel 
buttons to lock in Lock-out mode. 

You may need to change the printing position for continuous 
forms with labels if you are printing on a page that contains one 
or more labels in addition to regular printing. First use 
SelecType to turn on the Forms w/labels setting. Then use 
Default-setting mode and select the following settings to define 
the position of the label(s) relative to the base page.

* Adjusts the platen gap for printing on label carrier (base sheet). 

** Adjusts the platen gap for printing on labels affixed to label carrier.

Label base position 

Paper left edge, First dot

Label top position (the top 
edge of the label, from the top 
of the page) 

0 to 4752/216 
(Enter a value in 1/216-inch increments for 
0 to 22 inches)

Label length (the length of the 
label from top to bottom] 

0 to 4752/216 
(Enter a value in 1/216-inch increments for 
0 to 22 inches)

Label left position (the left edge 
of the label from the left edge 
of the page)

0 to 1440/120 (0 to 12” in 1/120-inch 
increments)

Label width (the width of the 
label from one side to the 
other)

0 to 1440/120 (0 to 12” in 1/120-inch 
increments)

Base sheet PG position number

0 to 14*

Label paper PG position 
number

0 to 14**