Epson PM 260 Introduction Manual

Press u or d to highlight the number for the best 
square (1 to 9) in set #2. Then press OK.

PictureMate aligns the print head and exits the 
Maintenance menu.

Note: The square you select becomes the middle square 
(#5) the next time you align the print head.

To keep PictureMate working at its best, you should 
clean it several times a year. Follow these steps: 

Turn off PictureMate, unplug the power cable, and 
disconnect the power adapter and any USB cable 
or device.

Remove all paper, then use a soft brush to clean 
any dust or dirt from the paper feeder and output 
tray.

Clean the PictureMate exterior with a soft, damp 
cloth. 

Use a soft, dry cloth to clean the PictureMate 
photo viewer screen. Do not use liquid or 
chemical cleaners on it.

Caution: Never use a hard or abrasive brush, or alcohol or 
thinner for cleaning; they can damage the components and 
case.

Don’t get water on the components and don’t spray lubricants 
or oils inside PictureMate.

●

Press the 

On button to turn on PictureMate.

●

Make sure the power cable and AC adapter are 
securely connected at both ends.

●

Make sure your power outlet works and is not 
controlled by a wall switch or timer.

●

If you’re using the optional battery, it may not be 
charged. Connect the AC adapter and plug it into 
an electrical outlet to charge the battery.

●

If you’re using the optional battery, PictureMate 
automatically turns off after 15 minutes if it is not 
being used. Press the 

 

button to turn it 

back on.