Epson 10000XL Specification Guide

Epson Expression 10000XL

4 - Epson Expression 10000XL

5/04

Lock the scanner’s transportation lock before transporting it or 
storing it for an extended time. 

1. Turn on the scanner and wait about 30 seconds for it to 

initialize. When the 

Ready

 light stops blinking and remains 

on, turn the scanner off.

2. Unplug the AC power cord, and then push down the 

transportation lock on the back of the scanner to the 

Lock

 

position.

3. Place the scanner in its original box, or use equivalent 

packing materials.

Before shipping or storing the transparency unit (TPU), follow 
these steps:

1. Use a coin to turn the transportation lock to the 

Lock

 

position.

2. Disconnect the TPU cable from the 

OPTION

 port on the 

back of the scanner.

3. Remove the TPU from the scanner and place it in its 

original box, or use equivalent packing materials.

Follow these steps to clean the scanner. 

1. Press the . power button to turn the scanner off, and 

unplug the power cord.

Caution: Always unplug the scanner before cleaning.

2. Use a soft, damp cloth and mild detergent to clean the outer 

case.

Caution: Be careful not to spill liquid or let water get into the 
scanner mechanism or electronic components. This could 
permanently damage them.

Never use alcohol, thinner, or corrosive solvent to clean the 
scanner. These chemicals can damage the scanner 
components as well as the case.

3. Clean dust and smudges from the document table glass with 

a soft, dry cloth (a microfiber glass cleaning cloth is 
recommended). You can also use compressed air spray 
cleaner.

To remove grease, use pretreated lens or scanner wipes, or a 
small amount of glass cleaner on a soft cloth. Dry the 
document table glass afterwards.

Caution: Never spray glass cleaner directly on the document 
table. Always spray it on a cloth first and then wipe the 
glass.

Never use a harsh or abrasive brush or cleaning product to 
clean the document table. A damaged glass surface can 
decrease the scanning quality.

Avoid leaving photos on the scanner glass for an extended 
period of time, or residue from the photos may adhere to the 
glass.