Epson 10000XL User Manual
84
Requirements and Notices
Macintosh
■
Macintosh PowerPC G3; PowerPC G4 with 500 MHz or faster processor recommended
■
OS 9.1 to 9.2 or OS X 10.2.x to 10.3.x
Note: Check the Apple web site for any updates to your operating system. Fast User
Switching is not supported for Mac
Switching is not supported for Mac
®
OS X 10.3 users.
■
USB (1.1 or 2.0) or IEEE 1394 (FireWire) port. To use the scanner’s optional network card, your
computer must be connected to an existing network using TCP/IP.
computer must be connected to an existing network using TCP/IP.
USB 2.0 requires Mac OS X 10.2.7 or later
IEEE 1394 requires IEEE1394a-2000 compatible and OHCI-compliant interface card; make sure
FireWire 2.1 or later is installed on your computer
FireWire 2.1 or later is installed on your computer
■
128MB RAM (512MB RAM recommended)
■
300MB available hard disk space
■
CD-ROM drive
■
VGA color monitor with 800 × 600 screen resolution (1024 × 768 or higher recommended)
■
16-bit 65K-color display adapter card (24-bit display adapter card with millions of colors
recommended)
recommended)
Important Safety Instructions
Read all of these instructions and save them for later reference. Follow all warnings and instructions
marked on the scanner.
marked on the scanner.
■
Unplug the scanner before cleaning. Clean with a damp cloth only. Don’t spill liquid on the
scanner. Use a soft, dry cloth or a compressed air spray designed for cleaning electronic equipment
to clean dust from the document table glass.
scanner. Use a soft, dry cloth or a compressed air spray designed for cleaning electronic equipment
to clean dust from the document table glass.
■
Do not place the scanner on an unstable surface or near a radiator or heat source.
■
Use only the power cord that comes with this product. Use of another cord may result in fire or
electric shock.
electric shock.
■
This product’s power cord is for use with this product only. Use with other equipment may result
in fire or electric shock.
in fire or electric shock.
■
Use only the type of power source indicated on the scanner’s label, and always supply power
directly from a standard domestic electric outlet with a power cord that meets the relevant local
safety standards.
directly from a standard domestic electric outlet with a power cord that meets the relevant local
safety standards.
■
Connect all equipment to properly grounded power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that regularly switch on and off.
circuit as photocopiers or air control systems that regularly switch on and off.
■
Do not let the power cord become damaged or frayed.
10000XL.book Page 84 Friday, June 4, 2004 1:57 PM