Epson priorityfax 3000 User Manual

Page of 122
Troubleshooting
Copying
Nothing comes out of the paper slot.
• The paper roll may not be inserted properly. See Chapter 1.
• The recording paper may be jammed. Push down on the paper
cover button 
to open the fax machine. Pull out the jammed
recording paper. Use scissors to make a clean edge on the end
of the paper roll. Reinsert the paper according to the
instructions in Chapter 1.
No image appears on the paper.
• The paper roll may be inserted upside down. See Chapter 1.
• Be sure that you inserted the document in the feeder face
down. Try copying again.
Print quality of the copy is poor.
• You may be using the wrong type of paper. Use Epson
PriorityFax recording paper for best results.
After checking the type of paper you are using try the following
steps:
Make another copy, but change the resolution setting as described
in Chapter 2. For detailed drawings or photos, use the fine or
photo modes.
Clean the inside of the fax machine as described in Chapter 6 and
make another copy.
If neither of these methods improves the image quality, take the
fax machine to an authorized Epson Customer Care Center.
To find the location of the nearest Customer Care Center, call
1-800-922-8911.