Epson CX5700F Quick Setup Guide
1
U n p a c k
Remove all the tape.
2
U n l o c k t h e P r i n t e r
1
Lift up the scanner.
2
Remove the tape from the ink
cartridge holder.
cartridge holder.
3
Close the scanner.
*410275200*
*410275200*
E P S O N S T Y LU S C X 5 7 0 0 F
3
Tu r n O n t h e E P S O N S T Y LU S C X 5 7 0 0 F
1
Connect the power cable.
2
Press
the On button.
4
I n s t a l l I n k C a r t r i d g e s
Note:
Don’t load paper before installing the ink cartridges.
1
Lift up the scanner.
2
Open the ink cartridge cover.
3
Shake the ink cartridges, then
unpack them.
unpack them.
4
Insert the cartridges in the holder for each color.
5
Press the cartridges down until they click.
6
Close the ink cartridge cover and press it down until it clicks.
7
Close the scanner.
8
Press the OK button to charge ink. Charging takes about
2 minutes.
2 minutes.
Caution:
Don’t turn off the EPSON STYLUS CX5700F while Charging
appears on the LCD screen or you’ll waste ink.
5
L o a d Pa p e r
1
Open the paper support and pull up its extensions.
2
Open the output tray and pull out its extension.
3
Flip the feeder guard forward.
4
Slide the edge guide left.
5
Load paper against the right edge guide and slide the left edge
guide over.
guide over.
6
Flip the feeder guard back.
Start
Color
OK
Paper support
Output tray
A4 size
10 x 15 cm (4 x 6-inch)
or 13 x 18 cm (5 x 7-inch)
S t a r t H e r e