Epson rx510 User Guide
Maintenance and Transporting
80
4.
Press the A or l/r Select button repeatedly until 5.Head
alignment
alignment
appears on the LCD panel, and then press the x Color
button. The alignment patterns are printed.
5.
Look at the alignment patterns. Find the pair of vertical lines that
is aligned in pattern #1, and then enter the number using the
numeric buttons. Finally, press the x Color button to enter your
selection.
is aligned in pattern #1, and then enter the number using the
numeric buttons. Finally, press the x Color button to enter your
selection.
6.
The next pattern number appears. As with pattern #1, find and
register the aligned pairs for the remaining alignment patterns
#2 through #4.
register the aligned pairs for the remaining alignment patterns
#2 through #4.
After all patterns are set, the print head alignment operation is
completed.
completed.
Transporting This Product
If you need to transport this product, carefully repack it using the
original box (or a similar box that this product fits snugly into) and
packing materials as follows:
original box (or a similar box that this product fits snugly into) and
packing materials as follows:
c
Caution:
❏
❏
When storing or transporting this product, avoid tilting it,
placing it vertically or turning it upside down; otherwise ink
may leak from the cartridge.
placing it vertically or turning it upside down; otherwise ink
may leak from the cartridge.
❏
Leave the ink cartridges in their installed positions when
transporting this product; removing the cartridges for
transportation may damage this product.
transporting this product; removing the cartridges for
transportation may damage this product.
1.
Remove all paper from the sheet feeder and make sure that this
product is off.
product is off.