Epson 1000 Reference Guide

HP Emulation Command Summary

This section lists the printer commands supported by HP

emulation. For more information on printer commands, see the

Hewlett-Packard LaserJet IIP III Printer Technical Reference

Manual.

Note:

To use these printer commands, your software package must be

capable of passing these non-printable commands to the printer. The

method in which each software uses these commands varies from one

software to another.

All commands closely emulate the HP LaserJet series III except

for the following:

ESC &l # A can be used to select the following eight paper sizes:

Executive, Letter, Legal, A4, Monarch, Com-10, International

DL, and International C5. This command overrides the PAGE

SIZE setting in SelecType. Other paper sizes cannot be specified

with this command.

ESC &1#H works differently whether it is used in INPUT

AUTO or not. When you set INPUT AUTO, this command can

only be used to specify single sheet paper feeding when the

value of # is 2,3, or 6. The printer returns to INPUT AUTO with

any other values. When you set INPUT STD or OPT, the values

for # produce the effects listed in the following table.

B-32

HP Emulation Mode