Epson 2250 User Manual

Printing 

You can use carbonless continuous multi-part forms of up to three

parts (one original plus two copies).

l

Load multi-part forms with the push tractor only. You load

multi-part continuous paper the same way as ordinary

continuous paper. For details, see “Loading continuous paper”

on page 2-7.

l

Use only multi-part forms joined with spot-gluing that is free of

wrinkles and waves. Never print on multi-part forms joined

with metal staples, tape, or continuous gluing.

l

If you need to adjust the top-of-form position, use your software

or change the default top-of-form position as described in

Chapter 3. You may have to experiment to get the setting you

want.

This printer can print on labels, but you must use the push tractor.

0

When you use labels, always be sure that

l

they are not fed backward because backward feeding can

make them peel off their backing and jam the printer.

To make sure that the labels do not peel off and jam the printer,

change the back-feed setting in the default-setting mode to Disable.

(For instructions, see “Changing the default settings” in Chapter 3.)

When the back-feed setting is Disable, the printer never feeds paper

backward.

The back-feed setting of Disable produces the following results:

l

The printer does not feed paper to the paper-park position even

if you press the 

and 

buttons.

l

The tear-off feature is disabled.