Epson c1000 Reference Manual
Ready and Error Lights (1/1)
EPSON AcuLaser C1000 Quick Reference
Ready and Error Lights
The ready (green) and error (red) lights on
the top of the printer may be the first
indication of trouble. The status of the lights,
on, off or flashing, indicates your printer
status as described below.
The Status Alert window in the EPSON
Status Monitor 3 utility indicates what type
of error has occurred and offers you a
possible solution. Look through this section
to find the kind of problem you have, then
try the recommended solutions in the order
they are presented until your problem is
solved.
the top of the printer may be the first
indication of trouble. The status of the lights,
on, off or flashing, indicates your printer
status as described below.
The Status Alert window in the EPSON
Status Monitor 3 utility indicates what type
of error has occurred and offers you a
possible solution. Look through this section
to find the kind of problem you have, then
try the recommended solutions in the order
they are presented until your problem is
solved.
Note:
If the problem remains after trying the
suggestions in this section, contact your dealer
for assistance.
If the problem remains after trying the
suggestions in this section, contact your dealer
for assistance.
error light
ready light
Ready
Light
(green)
Light
(green)
Error
Light
(red)
Light
(red)
Printer Status
Off
Off
Printer’s power is turned off.
On
Off
Printer is ready for printing or
printing a job. To get current
information about the printer,
check the EPSON Status
Monitor 3 utility.
printing a job. To get current
information about the printer,
check the EPSON Status
Monitor 3 utility.
Flashing
Off
Printer is warming up,
receiving data, or adjusting
for printing.
receiving data, or adjusting
for printing.
Slow
flashing
flashing
Off
A consumable product is
almost used up. Check the
alert message of EPSON
Status Monitor 3 utility and
replace the consumable with
a new one.
almost used up. Check the
alert message of EPSON
Status Monitor 3 utility and
replace the consumable with
a new one.
On
Flashing
There is an error that can be
easily remedied. Check the
alert message of EPSON
Status Monitor 3 utility for the
solutions.
easily remedied. Check the
alert message of EPSON
Status Monitor 3 utility for the
solutions.
On
On
The cover of the printer is
open, the printer is out of
paper, or paper is jammed in
the printer. When printing with
the duplex unit, make sure
that the paper size setting is
correct.
open, the printer is out of
paper, or paper is jammed in
the printer. When printing with
the duplex unit, make sure
that the paper size setting is
correct.
Flashing
On
Protocol error has occurred.
Try turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
Try turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
Off
On
An error has occurred. Try
turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
Flashing alternately.