Epson EPL-6200 Reference Guide
Troubleshooting
402
11
11
11
11
11
11
11
11
11
11
11
11
Operational Problems
The Ready light (green) does not turn on when you turn the
printer on
printer on
Cause
What to do
The printer may not be
connected to the electrical
outlet.
connected to the electrical
outlet.
Turn off the printer and check the power
cable connections between the printer
and the electrical outlet; then turn the
printer back on.
cable connections between the printer
and the electrical outlet; then turn the
printer back on.
The electrical outlet may be
controlled by an outside
switch or an automatic timer.
controlled by an outside
switch or an automatic timer.
If the electrical outlet is controlled by an
outside source such as a wall switch,
make sure the switch is turned on or
plug another electrical device into the
outlet to check whether the outlet is
operating properly.
outside source such as a wall switch,
make sure the switch is turned on or
plug another electrical device into the
outlet to check whether the outlet is
operating properly.
The Ready light (green) is on but nothing prints
Cause What
to
do
Your computer may not be
properly connected to the
printer.
properly connected to the
printer.
Perform the procedure described in the
Setup Guide.
Setup Guide.
The interface cable may not be
plugged in securely.
plugged in securely.
Check both ends of the cable between
the printer and the computer. Be sure to
secure the connector using the wire
retaining clips.
the printer and the computer. Be sure to
secure the connector using the wire
retaining clips.
You may not be using the
correct interface cable.
correct interface cable.
If you are using the parallel interface,
make sure you use a double-shielded,
twisted-pair interface cable no longer
than six feet in length.
make sure you use a double-shielded,
twisted-pair interface cable no longer
than six feet in length.