Epson EPL-6000 User Manual

If you need to move the printer a short distance, such as from one

room to another, make sure that you keep the printer level.

If you are shipping the printer, you need to repackage the printer
and its accessories. Read and carefully follow the instructions below.

Also make sure that the shipper takes adequate precautions to avoid
damaging the printer.

WARNING: Do not ship the printer with the drum unit
and developer unit installed in the printer. Also, do not
vacuum toner out of the developer unit.

To pack the printer you need all the original packing materials that

came with the printer and some packing tape. You also need two

large plastic bags for packing the drum unit and developer unit, to

contain any toner displaced during shipping.

Prepare the EPL-6000 for transportation by following the steps

below:

1.

Be sure that your printer and computer are turned off.

Remove the power cord and the cable connecting your printer

and computer.

Remove any cartridges from the cartridge slots.

Remove any paper still in the paper cassette. Then remove the
paper cassette and the faceup output tray from the printer.
Repackage each tray in its original packing material.

Open the printer using the latch at the front.

Lift out the basket and place it on a flat surface.