Epson EPL-N3000 Reference Guide
376
Functions of the Control Panel
If you select BarCode, the printer converts bit images to bar codes
by automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. This mode will reduce the size of the image being printed,
and may also cause some distortion when printing bit image
graphics.
by automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. This mode will reduce the size of the image being printed,
and may also cause some distortion when printing bit image
graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.
Support Menu
Enter the Support Mode by pressing the
Down button while
turning the printer on, to make the Support Menu appears.
LCD Backlight
Set the LCD control setting. When Auto is selected, the printer
controls the backlight of the LCD panel automatically. When the
printer is in sleep mode, the backlight is off.
When On is selected, the LCD backlight is always on.
controls the backlight of the LCD panel automatically. When the
printer is in sleep mode, the backlight is off.
When On is selected, the LCD backlight is always on.
HDD format
Formats the Hard Disk Drive in the printer, if one is installed.
PS3 HDD Init
Initializes the hard disk drive area where PostScript information
is stored, if both PostScript 3 and a hard disk drive are installed.
is stored, if both PostScript 3 and a hard disk drive are installed.