Epson LQ-570e User Manual
A
Enhancing Your Printer With Options
A-21
R4C4620
Rev. C
Rev. C
A5 size
OPTIONS.FM
3/29/00
Pass 3
R
Proof Sign-off:
SEI
SEI
Y.Ohkawara T.Takahashi
T.Takahashi
T.Takahashi
SEI
M.Kauppi K.Blair
3. Hook the tension lever onto both ends of the stand as shown
below. While pulling up the tension lever, fit the wire ends of
the tension lever into the holes in the stand. The roll paper
holder is assembled.
the tension lever into the holes in the stand. The roll paper
holder is assembled.
Installing the roll paper holder
To install the roll paper holder, follow the steps below.
1. Make sure the printer is turned off.
2. Position the roll paper holder underneath the printer as
shown below. Fit the two positioning pegs on the bottom of
the printer into the two holes in the base plate.
the printer into the two holes in the base plate.
c
Caution:
The roll paper holder is not fastened to the printer; only the
printer’s weight and the two positioning pegs hold it in place. If
you pick up the printer, be careful not to drop the roll paper holder.
The roll paper holder is not fastened to the printer; only the
printer’s weight and the two positioning pegs hold it in place. If
you pick up the printer, be careful not to drop the roll paper holder.
tension lever