Epson LQ-570e Quick Reference Card

Page of 15
If Your Printer Stops Printing Unexpectedly... 
Check the printer’s control panel lights and follow the appropriate instructions below. For more 
information, see Chapter 7 of your User’s Guide.
The printer stops printing and the Pause light is on.
Cause
Solution
The printer is paused.
Press the Pause button to resume printing.
You moved the paper release lever while 
paper from another paper source was in 
the paper path.
Move the paper release lever back to the appropriate 
position and press the Load/Eject button to feed the paper 
out of the paper path. Then set the lever to the position you 
want to use. Press the Pause button to turn off the Pause 
light, if necessary.
*
* If you are using the pull tractor, see your 
User’s Guide
 for instructions.
The Paper Out and Pause lights are on.
Cause
Solution
No paper is loaded in the selected paper 
source or paper is not loaded correctly.
Load paper in the printer, then press the Pause button to 
turn off the Pause light, if necessary.
Paper is jammed in the printer.
The Paper Out light is flashing and the Pause light is on.
Cause
Solution
Continuous paper is not fed to the standby 
position.
Tear off the printed document at the perforation; then press 
the Load/Eject button. The printer feeds the paper to the 
standby position. Press the Pause button to turn off the 
Pause light.
A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet. Then press 
the Pause button to turn off the Pause light, if necessary.
Paper is jammed in the printer.