Epson PM 290 Quick Setup Guide
2
Plug In and Turn On
1
Connect the power adapter to the back of
PictureMate.
2
Connect the power
cable to the power
adapter.
cable to the power
adapter.
3
Plug the other end
of the power cable
into a power outlet.
of the power cable
into a power outlet.
4
Flip the handle to the back.
5
Open the paper support.
6
Press the
On button to turn on PictureMate.
After a moment, you see
this on the photo
viewer screen:
this on the photo
viewer screen:
Now you can install your initial photo cartridge.
3
Install the Initial
Photo Cartridge
1
Turn PictureMate around and open the cartridge door.
2
Slide the cartridge lever left to the
Release position.
3
Remove the initial photo cartridge
from its package.
from its package.
Caution: Do not install a
different PictureMate
cartridge for initial setup.
Install only the initial photo cartridge
that came with your PictureMate.
different PictureMate
cartridge for initial setup.
Install only the initial photo cartridge
that came with your PictureMate.
4
Slide the cartridge straight into the slot, label side up,
until it clicks into place. It will not go in all the way.
until it clicks into place. It will not go in all the way.
5
Slide the lever all the way right, to the
Lock position.
6
Close the cartridge door.
PictureMate charges the print head for
3 to 4 minutes and displays the screen above.
3 to 4 minutes and displays the screen above.
7
When you see the
Charging complete
message on the photo
viewer screen, press
Charging complete
message on the photo
viewer screen, press
OK.
Turn over
*411058000*
*411058000*
Start Here
Follow these steps to set up your PictureMate Dash
or Zoom and print–no computer required!
Note: PictureMate Dash is shown throughout, but the steps are the
same for PictureMate Zoom. To print from your computer, see the
Basics book and your CD after completing these steps.
same for PictureMate Zoom. To print from your computer, see the
Basics book and your CD after completing these steps.
1
Unpack
PictureMate
®
comes with all these items in the box.
1
Remove all the tape and packing material from the
outside of PictureMate.
outside of PictureMate.
2
Open the cartridge door
on the back of
PictureMate.
on the back of
PictureMate.
3
Remove the packing
material from inside the
cartridge slot.
material from inside the
cartridge slot.
4
Close the cartridge door.
PictureMate
Initial PictureMate
photo cartridge
PictureMate
photo paper
Basics book
Printer Software CD
Power adapter
Power cable
Press here
PictureMate Zoom
TM
(PM 290)
I/
On
button
®
PictureMate Dash
TM
(PM 260)