Epson tm-u925 User Guide
1-6
Setting Up the Printer
Note:
To remove the cable, squeeze the connector and pull it out.
Connecting the Power Supply
When the printer is used as a single unit, not connected to an
intelligent module, use the optional EPSON PS-170 power supply
for your printer.
intelligent module, use the optional EPSON PS-170 power supply
for your printer.
When the printer is connected to an intelligent module, the power
is supplied by the intelligent module. See the IM-403/405 User's
Guide for details.
is supplied by the intelligent module. See the IM-403/405 User's
Guide for details.
CAUTION:
Make sure that you use the EPSON PS-170 power supply.
When connecting or disconnecting the power supply from
the printer, make sure that the power supply is not plugged
into an electrical outlet.
When connecting or disconnecting the power supply from
the printer, make sure that the power supply is not plugged
into an electrical outlet.
1. Make sure that the printer’s power switch is turned off, and the
power supply’s power cord is unplugged from the electrical
outlet.
outlet.
2. Check the label on the power supply to make sure that the
voltage required by the power supply matches that of your
electrical outlet.
electrical outlet.
CAUTION:
If the power supply's rated voltage and your outlet's
voltage do not match, contact your dealer for
assistance. Do not plug in the power cord.
voltage do not match, contact your dealer for
assistance. Do not plug in the power cord.
U925_eng.book Page 6 Thursday, July 25, 2002 9:15 AM