Epson tm-u925 User Guide
1-12
Setting Up the Printer
The printer is ready to receive data as soon as it completes the self
test.
test.
Note:
If you want to pause the self test manually, press the RECEIPT
FEED button. Then press the RECEIPT FEED button to continue
the self test.
FEED button. Then press the RECEIPT FEED button to continue
the self test.
Running the self test with slip paper
Note:
Be sure to install the paper roll to prevent slip paper jams.
1. Make sure the printer is turned off and the printer cover is
closed properly.
2. While holding down the SLIP FEED button, turn on the printer
to begin the self test. (The SLIP light blinks.)
3. Feed a sheet of slip paper into the printer. The printer loads the
paper automatically, prints the printer settings, and then ejects
the paper. (The SLIP light blinks.)
the paper. (The SLIP light blinks.)
4. Remove the paper from the printer and feed another sheet of
slip paper into the printer to print characters from the character
table. Continue to feed slip paper into the printer until the self
test prints the following:
table. Continue to feed slip paper into the printer until the self
test prints the following:
***completed***
The printer is ready to receive data as soon as it completes the self
test.
test.
Note:
If you want to pause the self test manually, press the SLIP FEED
button. Press the SLIP FEED button to continue the self test.
button. Press the SLIP FEED button to continue the self test.
U925_eng.book Page 12 Thursday, July 25, 2002 9:15 AM