Epson EX3200 User Manual
Setting Up the Projector
39
Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from Epson (see page 18) or an
electronics dealer.
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from Epson (see page 18) or an
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the Y/
Cb/Cr (or Y/Pb/Pr) connectors on your device.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video)
port on your projector using an
optional component-to-VGA video cable or adapter.
3. You may need to change the
Input Signal
setting in the
projector’s Signal menu to
Auto
VS200/EX3200
Computer (Component
Video) port
Video) port
EX5200/EX7200
Computer (Component
Video) port
Video) port