Epson 503c Quick Setup Guide

®

®

Connect the power cord to your projector and plug the other end into a grounded outlet.

Connect the other end to your laptop’s video or      monitor port. If you can’t connect the cable
to your PowerBook

®

, you may need to use an adapter. See your User’s Guide for instructions.

To shut the projector down properly:

1. Press the red Power button twice. 

Let the projector cool while the     power
light flashes orange (about a minute). 

2. Once the light stops flashing and stays

on, it’s safe to unplug the projector.

Never unplug the projector when the

power light is green or flashing orange.

For this setup, you’ll need just these two cables:

You won’t need to install any software. 

Make sure your projector and laptop are turned off.

Connect one end of the computer cable to 
the Computer port on the projector.

power cord

computer cable

The power light
turns orange.

Rotate the lens ring to pop out the lens, 
then squeeze the tabs to remove the lens cap.

To turn on the projector, press the red Power button. 
The power light flashes green, and then stays on.

Turn on or restart your laptop. (Windows

®

only: If you see

this Add New Hardware screen, click Cancel.)

Power button

Follow these

instructions to 

connect your laptop

to the projector. 

To connect other 

devices, such as a VCR

or desktop PC, see

your User’s Guide.

squeeze here