Epson 61p User Manual

Page of 116
Setting Up the Projector
21
Playing Sound Through the Projector
Your computer probably has its own sound system; however, it may 
not be adequate for your presentation. If you need more volume, you 
can connect a computer audio cable to take advantage of the 
projector’s built-in amplifier and speaker. You can obtain a computer 
audio cable (3.5-mm stereo miniplug cable) from a computer or 
electronics dealer.
1. Connect one end of the audio cable to the 
Audio1 
jack on the 
projector.
2. Connect the other end of the audio cable to your laptop’s
 headphone jack or 
 audio-out jack, or your desktop’s 
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 30 for instructions.
note
If you’ve connected two 
computers to the projector, 
you can play sound from 
both. Connect the audio 
cable for the computer 
connected to the 
Computer 2/Component 
Video 2
 connector to the 
Audio 2
 jack on the 
projector. Connect the other 
end of the cable to the second 
computer.