Epson 61p Product Datasheet
Epson PowerLite 61p/81p Projector
6/04 Epson PowerLite 61p/81p Projector
-
11
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
❏ Use a canister of compressed air to remove dust.
❏ To remove dirt or smears on the lens, use lens-cleaning
❏ To remove dirt or smears on the lens, use lens-cleaning
paper. If necessary, moisten a soft cloth with lens cleaner and
gently wipe the lens .
gently wipe the lens .
Caution:
Do not use glass cleaner to clean the lens.
Do not use glass cleaner to clean the lens.
Cleaning the Projector Case
Before you clean the case, first turn off the projector and unplug
the power cord.
the power cord.
❏ To remove dirt or dust, wipe the case with a soft, dry, lint-
free cloth.
❏ To remove stubborn dirt or stains, wipe the case with a soft
cloth moistened with a mild detergent.
Caution:
Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.
Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.
Cleaning and Replacing the Air Filter
Clean the air filter and air intake and exhaust vents on the
bottom and rear of the projector after every 100 hours of use.
If not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and
damage the projector. When the filter is clogged, the projector
displays the message
bottom and rear of the projector after every 100 hours of use.
If not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and
damage the projector. When the filter is clogged, the projector
displays the message
The projector is overheated
.
To clean the air filter and air vents, follow these steps:
1. Turn off the projector, allow it to cool down, and unplug the
power cord.
2. Clean the air vent on the back of the projector.
Use a small vacuum cleaner designed for computers and
other office equipment. If you don’t have one, use a very soft
brush (such as an artist’s brush).
other office equipment. If you don’t have one, use a very soft
brush (such as an artist’s brush).
Red
Off
Flashing red
There is a problem with the
fan or a sensor. Turn off the
projector and unplug it.
Contact Epson for help.
fan or a sensor. Turn off the
projector and unplug it.
Contact Epson for help.
Red
Flashing
red
red
Off
The lamp is burned out,
broken, or not installed
correctly, or the lamp cover is
open. Close the cover or
replace or reseat the lamp, if
necessary, as described on
page 12.
broken, or not installed
correctly, or the lamp cover is
open. Close the cover or
replace or reseat the lamp, if
necessary, as described on
page 12.
—
Flashing
orange
orange
Off
Replace the lamp with a new
one as soon as possible. See
page 12 for instructions. If
you continue to use the lamp,
there is a risk it may break.
one as soon as possible. See
page 12 for instructions. If
you continue to use the lamp,
there is a risk it may break.
Red
Off
Red
The projector has overheated
and turned itself off. Let it
cool for about five minutes,
then turn it back on. Make
sure there is plenty of space
around and under the
projector for ventilation. Also
clean the air filter and air
exhaust vents. If it continues
to overheat, you may need to
replace the air filter.
and turned itself off. Let it
cool for about five minutes,
then turn it back on. Make
sure there is plenty of space
around and under the
projector for ventilation. Also
clean the air filter and air
exhaust vents. If it continues
to overheat, you may need to
replace the air filter.
Flashing
red
red
Off
Flashing
orange
orange
The projector is too hot.
Make sure the room is not
above 95 °F and there is
plenty of space around and
under the projector for
ventilation. Clean the air filter
and air vents, if necessary.
Make sure the room is not
above 95 °F and there is
plenty of space around and
under the projector for
ventilation. Clean the air filter
and air vents, if necessary.
Orange
Off
Off The
projector is in standby or
sleep mode. You can unplug
it or press the P Power
button to turn it on.
it or press the P Power
button to turn it on.
Power
light
light
Lamp
light
light
Temperature
light
light
Description
Flashing
green
green
Off
Off
The projector is warming up.
Wait for the image to appear.
Wait for the image to appear.
Green
Off
Off
The projector is operating
normally.
normally.
Flashing
orange
orange
Off
Off
The projector is cooling
down. Wait for the light to
stop flashing and remain
orange before unplugging it.
down. Wait for the light to
stop flashing and remain
orange before unplugging it.