Epson 7850p Product Datasheet

EPSON PowerLite 7850p Projector

6

 -

 EPSON PowerLite 7850p Projector

6/03

2. Press the corresponding 

Source

 button on the remote 

control to switch to the desired source. Or press the 

ESC

 

button to exit the preview screen without switching sources. 

Note: A red border surrounds the preview window for the 
currently selected source. You can use the 

 pointer button 

Enter

If you see a blank screen or a blue screen with the message 
No Signal after turning on your computer or video source, 
try the following:
❏ Make sure the cables are connected correctly.
❏ Make sure the power light is green and not flashing and the 

lens cover is off. 

❏ Try restarting your computer.
❏ Press the correct 

Source

 button on top of the projector or 

on the remote control. (Allow a few seconds for the 
projector to sync up after pressing the button.)

❏ Hold down the Fn key and press the function key that lets 

you display on an external monitor. It may have an icon 
such as 

 or it may be labeled 

CRT/LCD

. Allow a few 

seconds for the projector to sync up after pressing it. Check 
your laptop’s manual or online help for details. 

On most systems, the 

 or 

CRT/LCD 

key lets you 

toggle between the LCD screen and the projector, or 
display on both at the same time. 

❏ Depending on your computer’s video card, you might need 

to use the Display utility in the Windows

®

 Control Panel to 

make sure that both the LCD screen and external monitor 
port are enabled. See your computer’s documentation or 
online help for details.

You may need to set up your system to display on the 
projector screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select 

System

 

Preferences

, then 

select 

Displays

.

2. Make sure the 

VGA

 

Display

 dialog box is selected. 

3. Click the 

Arrange

 tab.

4. Make sure the 

Mirror Displays

 checkbox is selected.

®

You may need to set up your system to display on the 
projector screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select 

Control Panels

, then click 

Monitors

 or

 Monitors and Sound

.

2. Click the 

Arrange

 icon.

3. Drag one monitor icon on top of the other. 

If the 

Arrange

 option isn’t available, do the following:

1. Click the 

Monitor

 icon if necessary. 

2. Select a Simulscan resolution as shown. (Allow a few 

seconds for the projector to sync up.)

Select the 
VGA Display 
dialog box

Make sure 
Mirror Displays 
is checked

Click here

Drag one monitor 
icon on top of the 
other

Click here

Select a 
Simulscan 
resolution