Epson 7850p Supplementary Manual
3
Introduction
Your EPSON PowerLite 7850p projector now lets you project
wirelessly from an Apple
wirelessly from an Apple
®
Macintosh
®
computer equipped with an
AirPort
®
or AirPort Extreme (802.11b or 802.11g) wireless network
interface. This supplement includes the following:
■
System requirements for using the new wireless software
■
Software installation instructions
■
How to set up your Macintosh for wireless projecting
■
How to connect to the projector
When you’ve finished with the instructions in this supplement, see the
User’s Guide for information about creating projector groups,
receiving e-mail alerts, or using other networking features supported
by your projector.
User’s Guide for information about creating projector groups,
receiving e-mail alerts, or using other networking features supported
by your projector.
System Requirements
Before you install the software, make sure your Macintosh meets the
following requirements for projecting wirelessly:
following requirements for projecting wirelessly:
■
Power Macintosh
®
series, iMac,
®
PowerBook,
®
or iBook
®
series
system
■
Mac OS X 10.2.4 or above
■
AirPort (802.11b) or AirPort Extreme (802.11g) wireless network
interface
interface
■
At least 256MB of RAM
■
At least 128MB of free hard disk space
■
SVGA (800
× 600) or better display adapter and monitor
note
If you are using AirPort
Extreme, you must set the
Wireless mode to
Extreme, you must set the
Wireless mode to
802.11b
only
in the AirPort
®
Admin
Utility. See your AirPort
documentation, or contact
Apple technical support for
help.
documentation, or contact
Apple technical support for
help.