Epson 1080 User Guide
16
Setting Up the Projector
Also keep these considerations in mind:
■
Make sure there is plenty of space for ventilation around and under the projector. Do not
set the projector on top of loose materials that could block the vents underneath.
set the projector on top of loose materials that could block the vents underneath.
■
Make sure the projector is within 9.8 feet of a grounded electrical outlet or extension
cord.
cord.
Installing the Projector
To install the projector, you first need to determine the location, based on the size of your
screen (maximum diagonal image size). Use the table on page 15 as a guide to positioning the
projector. Note the following dimensions:
screen (maximum diagonal image size). Use the table on page 15 as a guide to positioning the
projector. Note the following dimensions:
■
Distance from the center of the lens to the mounting bracket holes: 2.60 inches (66 mm),
0.35 inch (8.8 mm) maximum vertical lens shift
0.35 inch (8.8 mm) maximum vertical lens shift
■
Distance from the center of the lens to the center of the projector: 4.33 inches (110 mm),
0.30 inch (7.7 mm) maximum horizontal lens shift
0.30 inch (7.7 mm) maximum horizontal lens shift
PowerLite Home Cinema 1080.book Page 16 Wednesday, February 7, 2007 4:09 PM