Epson 1080 User Guide
Maintenance
53
2. Use the menu navigation buttons to open the
Info
menu. The following information
appears:
Note: The information displayed depends on the currently selected image source. The Lamp
Hours shows 0H until you’ve used the lamp for at least 10 hours.
Hours shows 0H until you’ve used the lamp for at least 10 hours.
The resolution indicates the total number of scan lines in the source signal. The number of visible
scan lines depends on the signal format standard and selected display settings (see page 63).
scan lines depends on the signal format standard and selected display settings (see page 63).
Storing the Projector
If you need to store the projector for an extended time, do the following:
■
Make sure the temperature of the storage area is within 14 to 140 °F (–10 to 60 °C).
■
Attach the lens cover and retract the feet.
■
Remove the batteries from the remote control.
■
Pack the projector in its original packaging or equivalent.
Transporting the Projector
Note: Epson shall not be liable for any damages incurred during transportation.
The projector contains many glass and precision parts. When shipping the projector for
repairs, use the original packaging material if possible. If you do not have the original
packaging, use equivalent materials. Be sure the carrier is capable of transporting fragile
equipment and is aware that the projector is fragile.
repairs, use the original packaging material if possible. If you do not have the original
packaging, use equivalent materials. Be sure the carrier is capable of transporting fragile
equipment and is aware that the projector is fragile.
Before transporting the projector, make sure you center the lens by turning the lens shift dials
until they click.
until they click.
■
Lamp Hours
■
Refresh Rate
■
Source
■
Sync Info
■
Input Signal
■
Video Signal
■
Resolution
■
Deep Color (color depth)
■
Scan Mode
■
Status (error information)
PowerLite Home Cinema 1080.book Page 53 Wednesday, February 7, 2007 4:09 PM