Epson elpmbuni Installation Guide

ELPMBUNI 

 

 

 

Installation Manual  

Page - 15 - 

1. 

Review your projector’s distance calculation to determine what distance is recommended from the front of 
the lens to the edge of the screen for best picture ratio.  

2. 

Locate the inverted projectors top of the lens point to a point centered horizontally on the screen and no 
higher then the top image edge of the screen).  

3. 

It is normally better to have the top edge of the lens as close to parallel with the top image edge of the 
screen as well.  

4. 

Before you mount your screen and projector, make sure the mounting location will safely support the 
weight of the projector. 

 NOTE:  Make sure to measure from the center of the mounting bracket to the front edge of the lens to 

determine the proper placement of the center of the upper assembly.  

NOTE:  If installing the security kit (ELPMBSEC), please refer to the security kit installation guide 

before attaching the ceiling plate to the ceiling or wall. 

 

5. 

Secure the ceiling assembly into a solid wood ceiling stud with the three (3) #14 x 2” wood screws 
(supplied) or with other (commercially available) hardware depending on your installation environment 
(Figure 9).

 

Secure the ceiling mount to the center of the wood 
stud.

 

Ceiling Structure

 

Wood Screws

 

Upper Assembly

 

Knurl Knobs (3ea)

 

Ceiling Wood Stud