Emerson lc190em2 User Guide

18

Channel List

The channels selected here can be skipped when selecting the 
channels using CH ▲/▼ .
Those channels can still be selected with the Number buttons.

1

 Use 

▲/▼ to select [Channel List], then press OK.

2

 Use 

▲/▼ to select the channel you want to remove, then 

press OK.

 

Highlight channels for 

Ch Up / Down key selection.

•  The channel display for the removed channel darkens. 

You will not be able to select the channel again using 

CH ▲/▼ .

•  To reactivate a removed channel, use ▲/▼ and press 

OK. The registered channels are highlighted.

•  When you remove a main channel, its subchannels are 

removed as well.

Note

 

• The channel with the [DTV] indicated on the display is ATSC.

Otherwise the channel is NTSC.

Add Channels

This function lets you add the off the air along NTSC or analog 
Cable channels that were not added by the autoprogram due 
to reception conditions at the initial setting.

1

 Use 

▲/▼ to select [Add Channels], then press OK.

2

 Use 

the Number buttons to enter the number of the 

channel you want to add, then press OK.

 

For analog channels, select a 

channel to be added using 

number keys.
For digital channels, you must 

perform Autoprogram function.

Note

 

• If setup completes successfully, [Added to the channel list.] is 

displayed.

 

• If external input is used, it is not possible to register the channel 

and [Unavailable] will be displayed on the TV screen.

 

• By using CH ▲/▼ , you can select the memorized channels only.

Antenna Confi rmation

This function lets you check the digital signal strength of each 
channel.

1

 Use 

▲/▼ to select [Antenna], then press OK.

2

 Use 

the Number buttons or CH ▲/▼  to select the 

channel for which you want to check the digital signal 
strength.

   

Note

 

• If the channel is set to analog (cable) channel or external input, 

you cannot confi rm the antenna condition.

1

 Use 

▲/▼ to select the item you want to adjust, then press 

OK.

 

2

  Adjust the following items.

Closed Caption

You can view closed captioning (CC) for TV programs, 
movies and news. Closed caption refers to text of dialog or 
descriptions displayed on-screen.

Use ▲/▼ to select [Closed Caption], then press OK.
See the following description for setting each item.