Eclipse avn7000 User Guide
145
5.1
ch
de
coder
● Touch
to cancel measurement.
To measure each channel separately
Insert the “Memory Stick Duo”.
Touch
for more than 2
seconds, until you hear a beep.
● After touching the switch, a 10-second
count down begins. Leave the vehicle
during that time.
during that time.
● Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
frequency characteristics will start.
● When measurement is complete, the
measurement results will appear on the
display. Measurement results for each
channel can be displayed by selecting
the desired channel.
display. Measurement results for each
channel can be displayed by selecting
the desired channel.
● Measurements can be written to a
“Memory Stick Duo” and corrected
automatically using the E-iSERV
website.
automatically using the E-iSERV
website.
● Touch
to cancel measurement.
CANCEL
MEASURE
CANCEL
Because this function is designed to make measurement of frequency
characteristics easier, slight errors may occur in the measurement data under
some circumstances. The measurements obtained are not equivalent to the
precise measurements that can be made by professional measuring devices.
characteristics easier, slight errors may occur in the measurement data under
some circumstances. The measurements obtained are not equivalent to the
precise measurements that can be made by professional measuring devices.
●Close all doors and windows while measurement is in progress.
●Sound quality data is written to the “Memory Stick Duo” as follows.
●Sound quality data is written to the “Memory Stick Duo” as follows.
●The folders and files that are required for E-iSERV sound effect customizations
are created automatically when the data is written to the “Memory Stick Duo”.
●Select a file in
when uploading sound quality data to the E-iSERV
website.
MSFTEN
SOUND
Adjustment mode
305*000.ftn
Three digit number
File extension
MSFTEN
SOUND