Audiovox fpe1505 Owner's Manual

Before calling for repair service, check the following items for possible remedies to the

Symptoms

Check item

This may be caused by obstruction to the antenna due to high

rise buildings or hills. Using a highly directional antenna may

“Ghost” or double images

Check that the AC power cord is plugged into the mains

socket.

Unplug the power cord, wait for 60 seconds. Then re-insert plug

No power

Check antenna connections at the rear of the unit to see if it

is properly connected to the unit.

Possible broadcast station trouble. Try another channel.
Adjust the contrast and brightness settings.
Check the Closed Captions control. Some TEXT modes could

block the screen.

Select a correct input.
Is a non-compatible signal being input?

No picture

Increase the VOLUME.
Check that the unit is not muted.

Good picture but no sound

• Adjust the contrast, color and brightness

Good sound but poor color

Sometimes, poor picture quality occurs when having

activated an S-VHS camera or camcorder connected and
having connected another peripheral at the same time. In this
case, switch off one of the other peripherals.

Poor picture

Check the antenna connection.

This may be caused by electrical interference (e.g. hairdryer,

nearby neon lights, etc.).

Turn off the equipment.

Check whether the batteries are working. Replace if

necessary.

Clean the remote control sensor lens on the unit.
Do not use the remote control under strong or fluorescent

Snowy picture and noise

Horizontal dotted line

Television not responding to
remote control

Check if you have selected the correct D-Sub mode in your

No stable or not
synchronized D-Sub picture

If your problem is not solved, turn your unit off and then on again once.

Note:

No output from one
of the speakers

Adjust Balance in the SOUND menu.

Troubleshooting

Do not use in hot or cold rooms (locations)

• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or

appear slightly delayed. This is not a malfunction, and the unit will recover when the
temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed

to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel

Control buttons do not work

Unplug the power cord, wait for some seconds. Then re-plug

the power cord and turn on the unit again.