GoVideo VR5940 Quick Reference Card

1

  Connect the unit to your TV and antenna/cable as shown.

2

  Turn on the DVD Recorder+VCR.

3

  Turn on your TV and set it to channel 3.

1

  Press 

SETUP.

2

  Select Tuning Band, and choose:

•  “

TV” if you are using a standard antenna to receive channels.

•  “CATV” if you are using basic cable to receive c

hannels.

3

  Select Auto Channel Set > Start:

•  The unit scans for all available channels and stores them in memory. This may take several 

minutes. When scanning is complete, the DVD Recorder+VCR tunes to the lowest channel found.

1

  Press 

SETUP.

2

  Select Clock Set > Manual.

3

  Use the / and  buttons to set the 

Year, Date & Time.

4

  When you are finished, press 

ENTER.

5

  Press 

SETUP to exit.

TV

TV

DVD Recorder + VCR

Remote Control

Audio/Video Cables

RF (Coax) Cable

Registration Card & User’s Guide

Blank DVD-RW Disc

2 AAA Batteries

1

  Connect the unit to your TV and cable box/satellite receiver as 

shown.

2

  Turn on your TV and set it to channel 3.

3

  Turn on the DVD Recorder+VCR and set it to channel 3.

4

  Turn on your Cable Box/Satellite Receiver.

You don’t need to set the clock (because it’s done automatically whenever

you turn off the unit), however you do need to search for channels:

About Cable Box/Satellite Receiver Setup
You don’t need to search for channels (because you select channels on
your cable box or satellite receiver), but you do need to set the clock:

Antenna or

Cable Box or

Welcome to the VR5940 Quick Start Guide—the 

fastest way to get started using your DVD 

Recorder+VCR. Just follow these easy steps, 

from unpacking and setting up to making your 

first recording.
If for some reason you need additional help, 

please make sure you have followed every step 

in this Quick Start and have referred to the 

User’s Guide before calling customer service.