Lexmark X7675 Network Guide

All computers and printers connect to the network using a wireless access point or wireless router.

The wireless access point connects the network to the Internet through a DSL or cable modem.

Internet

Computers and printers connect to the network using a wireless access point.

The network has no connection to the Internet.

A computer is directly connected to a printer without going through a wireless router.

This configuration is referred to as an ad hoc network.

The network has no connection to the Internet.

Note: Most computers can connect to only one wireless network at a time. If you access the Internet over
a wireless connection, you will lose Internet access if you are connect to an ad hoc network.

When setting up the printer on your wireless network, the printer will need to temporarily connect to a
computer using the installation cable. This temporary connection is used to set up the wireless settings of
the printer.

The installation cable connects to a rectangular USB port on the installing computer and the square USB
port on the printer.

The installation cable attaches to a USB port on the computer and to the square connector on the back of
the printer. This connection allows you to configure the printer for a networked or locally attached
installation.

Attach the large, rectangular connector to any USB port on your computer. USB ports may be on the
front or the back of the computer, and may be horizontal or vertical.

Frequently asked questions