Hitachi 802.11b/g/n USB USBWL11N User Manual

31

Configures the time difference. Set the same time difference 

as the one set on your computer. If unsure, consult your IT 

manager.

Click the [ON] check box to retrieve Date and Time 

information from the SNTP server and set the following items.

Configures the SNTP server address in IP format.

• The address allows not only IP address but also domain 

name if the valid DNS server is setup in the 

Settings. The maximum length of host or domain name is up 

to 255 characters.

Configures the interval at which to retrieve Date and Time 

information from the SNTP server (

hour:minute).

Click the 

[Apply] button to save the settings.

• The new configuration settings are activated after restarting the 

network connection. When the configuration settings are changed, you must 

restart the network connection. You can restart the network connection by 

clicking the 

[Network Restart] on the main menu (&41).

• If you connect the projector to an existing network, consult a network 

administrator before setting server addresses.

• Once you turn off the projector in the SAVING mode (&

SETUP menu in the 

Operating Guide) or the AC power, the current date and time setting is reset. 

• To enable the SNTP function, the time difference must be set.

• The projector will retrieve Date and Time information from the time server and 

override time settings when SNTP is enabled.

• The internal clock’s time may not remain accurate. Using SNTP is 

recommended to maintain accurate time.